1. Home
  2. Hydraulic reach mowers
  3. TSH Series
  4. TSH620 Energy

Share:

TSH620Energy.png

Hydraulic reach mowers TSH Series

TSH620 Energy

Decespugliatrici idrauliche TSH620 Energy
Max horizontal reach
6,15 m
Tractor power
90 ÷ 110 HP/PS
Min. tractor weight
3600 kg
Min. tractor width
2,30 m
Weight
1370 kg
Rotor power
57 HP/PS
Power of hydraulic system
63 HP/PS
Flail head angle
190°
Max Cutting width
8 cm
The TSH model has several new features especially in the area of operator safety, in detail, innovative efforts have mainly involved the chassis, where the innovative and award-winning Reverse Safety device has been provided. It has been included in the standard equipment and protects the chassis or booms from dangerous damage, should an obstacle be inadvertently hit while the tractor is being reversed, causing the boom to rotate forward. A safety system has also been provided as standard to protect against header impact in the forward direction of the tractor. An audible warning has then been provided to increase safety in case of overheating of the hydraulic system oil. A Soft Start device has also been added to the heat exchanger, which applied to the fan makes operation smoother and more harmonious. The new model uses either TNH (direct drive) or TNHC (belt drive) flail head model both have their frames reinforced, especially at the sides with STRENX 700, while the inner vault, which is much more prone to wear, is reinforced with some HARDOX 400, especially recommended for these heavy and demanding uses.
 
TSH Series
Download catalogue > PDF (3,9 Mb)
container 712 eng

DSR - Double Sense of Rotation

Standard equipment on all reach mowers.
container 718 eng

PSS - Power Slew Security

Designed to exclude the accumulator on the power slew ram (when working on a hillside).
container 719 eng

SRA - self-return system

In case of hydraulic break away, an accumulator controlled auto reset valve allows the automatic return of the arm into the working position.
container 723 eng

SAB - Roll-over protection system

Automatic roll-over protection when the first arm exceeds 90° in vertical position.
container 1076 eng

LFA - Lift Float Accumulator (optional)

(lift float on the 1st arm by accumulator) Permits the engagement and disengagement of the lift float on the 1st arm.
container 2051 eng

EFS - Electronic Floating System (optional)

It permits the flail head to follow the ground contours in an effective way. The weight will be tranferred to the tractor, decreasing the friction during work and at the same time increasing working speed.
container 736 eng

“DELTA BOX” frame

In consideration of the stress the reach mowers are subjected to during work, Ferri developed a new concept of frame, called «DELTA BOX» made of two sheet walls, which are laser-cut and joined with formed steel. The whole is welded on a robotized system; the structural design achieved is extremely light weight and strong.
container 743 eng

DUAL WAY

The flail head can rotate by 180° by means of an racket and pignon gear, allowing the work forwards and backwards.
Machine
 
Floating Head system
Standard
Self levelling device
Standard
High Performance cast iron gear box
Standard
Power slew
122°
Steel Frame structure with variable section
Standard
Pivoting bracket
Standard
Pressurized oil tank
170 L
Drop forged flail head linkages
Standard
1st arm rectangular section
120 x 180 mm
Parts made out of WELDOX 700 steel
Standard
Oil cooler in Alluminum with thermostat
Standard
Hour meter
Standard
Bumper with illumination system
Standard
Hydraulic system
 
Totally independent hydraulic system
Standard
Gear hydraulic system
Standard
ATT/4 sliding braket
Optional
Universal Axle Bracket
Optional
Cast iron hydraulic pump servicing the rotor
Standard
Cast iron hydraulic motor
Standard
Flail head
 
Double skin
Standard
“OVERLAP” with double rows spiral rotor
Standard
Specular 180° rotor
Standard
Rotor balancing on side flanges
Standard
Single toothed belt drive
Optional
Cutting tools fitted on pins (rotor with 22 postions)
Standard
Adjustable rear roller
Standard
Rear roller HD
Optional
Front and rear abrasion resistant guard for flail head
Standard
Replaceable skids
Standard
Safety
 
Block valves to lock the pivoting bracket during transfer
Standard
Automatic hydraulic block for transport
Standard
Kit to avoid arm overturn
Mechanical
Brackets
 
Stabilizers
Optional
container 874 eng

CLASSIC - Cable controls

Reliability and simply use. Standard on all machines Classic.
img-comandi-sctronic.jpg

SC TRONIC “Dual” - Two-section Load Sensing proportional electrical control. With CAN-Bus technology

The SC (Speed Criterions) Dual control gives you the ability to select different boom operating modes depending on the type of work you need to do. The joystick controls the proportional function of the first and second booms. The rotation of the booms and tilting of the head are are proportional functions driven by “roller” controls on the joystick. There are also buttons on the joystick that handle extension (for telescopic models) and the floating head system. In the detached section of the console, the buttons control the rotor, boom suspension, the ignition of the nitrogen accumulator for automatic return to the working position and the Electronic Floating System EFS for suspension of the head.
container 923 eng
container 932 eng

TNH 125 NG

Professional Flail head suitable for reach mowers with gear hydraulic system and cast iron motor withdirect drive. “OVERLAP” rotor with 2 spiral rows (180° specular rotor, alternating rotor sides it is possible to use the other side of the blade to extend the blade life). Reinforced frame, sides in STRENX 700, internal vault reinforced with HARDOX 400.
Cutting width: 1,25 m
Weight: 315 Kg
Max cutting diameter: 8 cm
container 22447 eng
container 22446 eng

TNHC 125 NG (optional)

Professional Flail head suitable for reach mowers with gear/piston (closed circuit) hydraulic system. Cast iron motor with toothed belt drive. “OVERLAP” rotor with 2 spiral rows (180° specular rotor - alternating rotor sides it is possible to use the other side of the blade to extend the blade life). Reinforced frame, sides in STRENX 700, internal vault reinforced with HARDOX 400.
Cutting width: 1,25 m
Weight: 315 Kg
Max cutting diameter: 8 cm
container 21192 eng

TR 13

Cutter bar
Cutting width: 1,30 m
Max cutting diameter: 8 cm
container 21193 eng

TR 22

Cutter bar
Working width: 2,20 m
Max cutting diameter: 8 cm
container 21189 eng

FF 45

Ditch cleaner.
Working width: 0,45 m
container 21191 eng

FF 60

Ditch cleaner.
Working width: 0,60 m
container 21188 eng

SE 31

Blower recommended in works along roads in order to clean the pavement and ground from the debris.
Airflow output: 90mc/min
TSH

Information request

Once you have filled in and sent this form, you will be sent a specific reply to your request as soon as possible.
Please complete all fields carefully, and make sure that you type in your data correctly so that we can contact you.
(* Mandatory fields)
* Activicty sector
How did you know us?

Related products

Decespugliatrici idrauliche TSP530 Energy
Max horizontal reach
5,34 m
Tractor power
80 ÷ 120 HP/PS
Min. tractor weight
3800 kg
TSP530 Energy
This Website uses functional and users profiling (anonymized) cookies, first and third parties’ ones, for analytics service. Keeping web browsing without closing this banner or selecting “only functional cookies” the website will use only functional cookies, instead, selecting “allow cookies” will use all the cookies as described in the “PRIVACY POLICY”. You may change the settings of cookies at any time by selecting the “PRIVACY POLICY” link on the website from which you may easily refuse to give consent to the installation of cookies.
Allow cookies Only functional cookies